Trustpilot
NLS G3.5 DNA75 / 200 / 250 Enclosure - 3 Actuator - Gun Metal
Menu
Out of stock!
Fill this form to be informed when this product arrives:
Name
E-mail

Send Close
Out of stock!
Fill this form to be informed when this product arrives:
Name
E-mail Send Close
Welcome to StealthVape

**Our official order cut off for same day despatch is 12pm Midday GMT/UTC but we often continue to pack orders up to 15:30 GMT/UTC**

NLS G3.5 DNA75 / 200 / 250 Enclosure - 3 Actuator - Gun Metal

NLS G3.5 DNA75 / 200 / 250 Enclosure - 3 Actuator - Gun Metal
NLS G3.5 DNA75 / 200 / 250 Enclosure - 3 Actuator - Gun Metal
Product Code: NLS-G3-DNA-3A-GUN
Availability: In Stock
Price: £21.99
Ex Tax: £18.33
Qty:     - OR -   Add to Wish List
Add to Compare
Notable changes for this revision are
  • Threaded inset for 22mm 510 connector. M12x1 suitable for Source 510's
  • Thicker top wall to allow for thread and extra support for 510
  • Finer tolerance for magnet holes for better push fit.

IF you are powder coating please leave a message in the order comments and we will not fit magnets.

USB shield on DNA boards needs to be trimmed slightly

This listing is for an enclosure box and lid only with press fitted magnets.

 
Mounting kits are available HERE
 
Acrylic board holders for DNA75/200/250
 
Actuators are available HERE
 
Please note, if ordering a DNA board from us the mounting kit and board holder are available as a free item
 
Gun metal anodised enclosure and lid with milled DNA hole pattern.
 
Domed, raised, flush and recessed actuators sold separately. Vamo buttons/actuators are not suitable for this enclosure.
 
Suitable LiPo packs are Turnigy Nano 1300mAh 25/50C and Turnigy Aspec 1300mAh. Plenty of space for 1000mAh Turnigy Nanos too. No other cells have been tested for compatibility.
 
Sized for XT30 lipo connectors. You will need to fit an XT30 to most packs
 
Dual battery sleds 'almost fit' and may require the sides sanding slightly. Injection molded IM2X18650 sleds fit wit no modification.
 
The m1.6 screw holes have a chamfer to suit the smaller 2.5mm head screws in our mounting kit.
 
 
 
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Payment Cards SSL Secured
VAT No. GB 182 4589 78
Company Registration No. 8555933
Powered By OpenCart
StealthVape © 2018