Recent Reviews
Random reviewed AWG Sized Kanthal A1 Type Flat Wire on 12/11/2016

5
Once, I saw a stoat. Have not seen any since that day.


Pete Carss reviewed Standard Issue Resistance Wire on 12/11/2016

5
Been using the 26g in Genesis builds. Seems to have better characteristics than Kanthal.


James reviewed AWG Sized Kanthal A1 Type Flat Wire on 12/11/2016

4
Far easier to coil with, increased surface area noticeable and a great vape, just drains batteries!! Awesome wire, as usual from strath vape, just wish it was available in a thinner high resistance form: if I could get 0.35 and 0.3mm equivalent I would use only this.


Tony sheikh reviewed 316L Stainless Steel Wire - Annealed on 12/11/2016

5
Great service as usual thank you


Jason reviewed Clear Atty Swirl Gaskets on 12/11/2016

5
Perfect for those atty's that have longer 510 threads or mods like joyetech that have short threads. Thanks Stealth Vape :)

Out of stock!
Fill this form to be informed when this product arrives:
Name
E-mail

Send Close
Out of stock!
Fill this form to be informed when this product arrives:
Name
E-mail Send Close
Welcome to StealthVape

**Our official order cut off for same day despatch is 12pm Midday GMT/UTC but we often continue to pack orders up to 15:30 GMT/UTC**

Swedish Vaper PotBelly PWM

Swedish Vaper PotBelly PWM
Swedish Vaper PotBelly PWM Swedish Vaper PotBelly PWM
Product Code: POT-BELLY
Availability: In Stock
Price: £21.99
Ex Tax: £18.33
Qty:  
   - OR -   
Swedish Vaper PotBelly PWM
 
The Swedish Vaper PotBelly PWM is a very small unit designed to fit in tight spaces to provide
variable output power in a personal vaporiser (mod).
 
Not much larger than the potentiometer itself, it is intended as a simple drop-in solution with a
minimalist 3-wire connection setup and can be used as an all-in-one solution or to trigger an external
p-channel mosfet.
 
Supplied pre-wired with positive wire and 16awg negative wires.
 
Connecting to a voltmeter can be done easily (see diagram).
 
Operates on 2v – 18v(max), accommodating 1S – 4S battery configurations.
 
Recommended minimum coil builds:
 
2S: 0.2 ohm
 
3S: 0.3 ohm
 
Although the onboard mosfet is a high-grade 300A component, due to the small size of the PotBelly
 
there is a max of 65A recommended for safe operation.
 
As with all PWM boards, when calculating the load (amps) use the battery’s full voltage as a basis,
 
NOT the average voltage displayed on a voltmeter connected to the board. E.g:
 
 
0.2 ohm on 2S:
 
Voltage 8.40V (regardless of potentiometer position)
 
= Current 42.00A
 
= Power 352.80W
 
The PotBelly is intended for advanced users with some soldering experience. Be safe, follow the
diagram and enjoy!
 
V3.5 StealthVape Edition:
 
  • 1-5% tolerance Vishay or Murata 75v resistors
  • 5% tolerance Johanson TanCeram capacitors
  • 4.3A 30v Diodes Inc. p-channel mosfet
  • 300A NXP n-channel power mosfet (ultra-low gate resistance of <720uOhms)
  • 93PR50KLF potentiometer (50K makes for a quieter vaping experience)
  • Gold-plated Molex C-grid III PCB connector pins to bind the two pcb’s together
  • Soft silicone multi-strand connection wires

swedish vaper pot belly pwm board

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Tags: swedish, vaper, pot, belly, pwm, ,
Payment Cards
VAT No. GB 182 4589 78
Company Registration No. 8555933
Powered By OpenCart
StealthVape © 2017