Notable changes for this revision are
Threaded inset for 22mm 510 connector. M12x1 suitable for Source 510's
Thicker top wall to allow for thread and extra support for 510
Finer tolerance for magnet holes for better push fit.
IF you are powder coating please leave a message in the order comments and we will not fit magnets.
USB shield on DNA boards needs to be trimmed slightly
This listing is for an enclosure box and lid only with press fitted magnets.
Mounting kits are available HERE
Actuators are available HERE
Please note, if ordering a DNA board from us the mounting kit and board holder are available as a free item
Red anodised enclosure and lid with milled DNA hole pattern.
Domed, raised, flush and recessed actuators sold separately. Vamo buttons/actuators are not suitable for this enclosure.
Suitable LiPo packs are Turnigy Nano 1300mAh 25/50C and Turnigy Aspec 1300mAh. Plenty of space for 1000mAh Turnigy Nanos too. No other cells have been tested for compatibility.
Sized for XT30 lipo connectors. You will need to fit an XT30 to most packs
Dual battery sleds 'almost fit' and may require the sides sanding slightly. Injection molded IM2X18650
sleds fit wit no modification.
The m1.6 screw holes have a chamfer to suit the smaller 2.5mm head screws in our mounting kit.