LIMITED DISCOUNT CODE - ENTER DROCT11 AT CHECKOUT FOR AN 11% DISCOUNT ON YOUR ORDER
This product is just the enclosure, other parts shown in the images above are for illustrative purposes only.
You will receive
This enclosure is suitable for lipo batteries only, please buy our keystone dna coil station enclosure to use 1x or 2x 18650's.
The corner posts are made from slices of 3mm acrylic. 8 slices are supplied per corner for a 25mm post. This is only 24mm, to take this into account and also the tolerance of 3mm acrylic sheet (+/-20%) we will supply 8 x 2mm thich black spacers. You will be able to use a combination of the slices supplied to reach 25mm.
Suitable for a DNA200 or DNA250 with a 3s lipo. We used a turnigy nanotech 1300 in the above images.
Suitable for a DNA75 with an appropriate 1s lipo
Remember acrylic can melt so solder the 510 negative ring before fitting
510 cutout s 12mm for our Source 510 connectors up to 30mm in size.
The acrylic top is 3mm (+/-20%) thick, please use 3mm or 3.5mm deep actuators.
Wire 18g battery / 16 or 14g 510