A selection of M1.6 threaded fittings to mount a DNA2530, 200 or 75 board
3 x 6mm brass posts, diameter 3.5mm
3 x 4mm plated carbon steel pan head screws
4 x 4mm 304 stainless steel 120° countersunk screws with a head diameter of 2.5mm
4 x 7mm 304 stainless steel 120° countersunk screws with a head diameter of 3.1mm
1 x Plated carbon steel nut
Cutting template included with dimensions for vamo buttons
The 4mm pan head screws are for the board side.
The 4mm countersunk screws are suitable for hammond enclosures, milled gboxes or any other enclosure with a wall thickness of 1.8mm
The 7mm countersunk screws are suitable for enclosures with a thicker wall, up to 4mm just file to size.
The included nut is to be used with the spare case screw for those that appreciate symmetry :)
An adhesive cutting template is included. Simply trim to the red lines and affix. Applying some clear tape over the top of the template is advised.
The template also has dimensions for vamo buttons, however if using vamo buttons a little has to be filed off the bottom to make them fit without firing the board switches.
We're unsure about how different metals will react with each other when used for a common ground, whether there will be some sort of corrosion or oxide build up so it for this reason that we advise a ground wire is still used.