A selection of M1.6 threaded fittings to mount an NLPWM board
3 x 5.25mm brass posts, diameter 3.5mm
3 x 4mm plated carbon steel pan head screws
4 x 4mm 304 stainless steel 120° countersunk screws with a head diameter of 2.5mm
4 x 7mm 304 stainless steel 120° countersunk screws with a head diameter of 3.1mm
1 x Plated carbon steel nut
The 4mm pan head screws are for the board side.
The 4mm countersunk screws are suitable for hammond enclosures, milled gboxes or any other enclosure with a wall thickness of 1.8mm
The 7mm countersunk screws are suitable for enclosures with a thicker wall, up to 4mm just file to size.
The included nut is to be used with the spare case screw for those that appreciate symmetry :)