Recent Reviews
Random reviewed AWG Sized Kanthal A1 Type Flat Wire on 12/11/2016

5
Once, I saw a stoat. Have not seen any since that day.


Pete Carss reviewed Standard Issue Resistance Wire on 12/11/2016

5
Been using the 26g in Genesis builds. Seems to have better characteristics than Kanthal.


James reviewed AWG Sized Kanthal A1 Type Flat Wire on 12/11/2016

4
Far easier to coil with, increased surface area noticeable and a great vape, just drains batteries!! Awesome wire, as usual from strath vape, just wish it was available in a thinner high resistance form: if I could get 0.35 and 0.3mm equivalent I would use only this.


Tony sheikh reviewed 316L Stainless Steel Wire - Annealed on 12/11/2016

5
Great service as usual thank you


Jason reviewed Clear Atty Swirl Gaskets on 12/11/2016

5
Perfect for those atty's that have longer 510 threads or mods like joyetech that have short threads. Thanks Stealth Vape :)

Out of stock!
Fill this form to be informed when this product arrives:
Name
E-mail

Send Close
Out of stock!
Fill this form to be informed when this product arrives:
Name
E-mail Send Close

Varitube 18650 bBattery Tube

Varitube 18650 bBattery Tube
Varitube 18650 bBattery Tube Varitube 18650 bBattery Tube Varitube 18650 bBattery Tube Varitube 18650 bBattery Tube
Product Code: VT-18650-TUBE
Availability: In Stock
Price: £12.99
Ex Tax: £10.83
Qty:  
   - OR -   
Here's the ultimate in battery tubes for your mods.  The Varitube 18650 Spring loaded tube.  Often you purchase or make a nice wood shell and then your forced to make due without a quality solution for your battery.  This tube solves your problems!  
 
100% Brass Tube is chrome plated to prevent oxidation and break down.  Spring loaded for constant pressure and superior electrical connectivity.  Why short cut to most important aspect to your build?
 
  • Solid Brass tube and finished in chrome plating
  • Solid Brass top floating center pin is also chrome plated
  • Top pin is spring loaded to provide constant pressure and maintain perfect connection.  It self-adjusts to the minor differences in battery lengths and assures a solid connection
  • Electrical isolation is accomplished via PEEK insulator on top\
  • Spring carries no load
  • Positive center pin is also manually adjustable to set pressure/clearance of the spring depending on batteries.
  • Ground lug included and accomplished via installation into top cap.  Solder negative/ground connection directly to the lug.
  • Positive center pin bored to accept your wire for direct soldering
Dimensions:
  • Assembled tube length is 79.4mm
  • Center Pin and Ground lug add 1mm to overall length
  • Center pin needs room to float up during battery installation - 1mm-3mm
  • Major OD is 21.5mm at the cap ends
  • Minor OD is 20.4mm
  • ID is 18.7mm
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Payment Cards
VAT No. GB 182 4589 78
Company Registration No. 8555933
Powered By OpenCart
StealthVape © 2017